Olympia P-2300B Installation And Maintenance Instructions

MAINTENANCE AND CARE INSTRUCTIONS

Olympia products are designed and engineered under strict quality standards. Regular and proper care of our
products will ensure years of trouble free service. To clean, simply wipe with a damp, soft cloth. Do not use
abrasive or harsh cleaners as they may result in finish damage.

TROUBLE SHOOTING

A. No Cold / Hot Water: 1.
2.
3.
B. Low Flow / No Temperature 1.
Adjustment:
2.
3.
OLYMPIA FAUCETS, INC. LIMITED LIFETIME WARRANTY *
Olympia Faucets, Inc. warrants its products to the original consumer purchaser to be free from defects in material
and workmanship as long as the consumer purchaser owns it. Dated proof of purchase must accompany all war-
ranty claims. PVD finishes carry a lifetime warranty in residential service.
Olympia Faucets, Inc. will replace, free of charge, to the original consumer purchaser, any and all parts that
prove defective under normal installation, use, and service. Damage as a result of misuse, abuse, accident, or
improper installation, will consequentially void this warranty. Replacement parts can be obtained from your local
dealer or directly from Olympia Faucets. Olympia Faucets, Inc. recommends using a certified plumber for all
faucet installation and repair.
This warranty is limited to replacement of defective parts only. Incidental and consequential damages, labor
charges, repair, or replacement costs are expressly excluded. Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives
you specific legal rights, as you may have other rights of which vary from state to state.
Installation or maintenance and cleaning must be in compliance with instructions furnished with every Olympia
product. If you find a problem with your product, please immediately contact your nearest Olympia Faucets, Inc.
dealer or sales representative.
* 2 year limited warranty on commercial and multi-family projects.
Shut off valve control. Reopen slowly when the
supply pressure is equalized.
Check water supply to hot & cold inlets. (Valve is designed
to shut-off in the event of water flow is
interrupted to either hot or cold inlets.)
Check valve inlet stops (B) to see that both are in the fully
open position. (Valve is designed to shut off if flow is
diminished to either side.)
See above.
Close water supply and relieve the pressure.
Remove pressure balancing spool assembly (C). Clean
or replace. Flush the system. Reinstall and do not lube.
Restore the supply pressure.
INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR OLYMPIA SINGLE
HANDLE TUB AND SHOWER SETS
THIS PRODUCT MEETS THE FOLLOWING STANDARDS: ASME A112.18.1~ ANSI
A117.1 ~ UPC / IAPMO LISTED / ADA COMPLIANT
PRODUCT NUMBERS
#P-2300B Tub & Shower Valve Only With Inlet Stop
#P-2400B Tub & Shower Valve Only Without Inlet Stop
#P-2301B Tub & Shower Valve Only with Pex connections (Inlets & Shower Outlet) &
with Inlet stop
#P-2300CS Tub & Shower Set
#P-2300T* Tub & Shower Trim Only
#P-2301T* Tub Trim Only
#P-2302T* Shower Trim Only
#P-2303T* Valve Trim Only
#P-2340T* Tub & Shower Trim Only - Lever Handle
#P-2341T* Tub Trim Only - Lever Handle
#P-2342T*
Shower Trim Only - Lever Handle
#P-2343T* Valve Trim Only
#P-2360T* Tub & Shower Trim Only - Lever Handle
#P-2361T* Tub Trim Only - Lever Handle
#P-2362T* Shower Trim Only - Lever Handle
ADA*
Olympia Faucets, Inc. © 2013