Olympia L-7220 Installation And Maintenance Instructions

MAINTENANCE AND CARE INSTRUCTIONS
Olympia products are designed and engineered under strict quality standards. Regular and proper care of our
products will ensure years of trouble free service. To clean, simply wipe with a damp, soft cloth. Do not use
abrasive or harsh cleaners as they may result in finish damage. Regularly remove the aerator and clean any
debris inside it.
TROUBLE SHOOTING
A. If water leaks from the spout outlet: 1.
2.
3.
4.
5.
1.
B. If water leaks under the faucet:
2.
3.
C. If faucet has low flow: 1.
2.
3.
OLYMPIA FAUCETS, INC. LIMITED LIFETIME WARRANTY *
Olympia Faucets, Inc. warrants its products to the original consumer purchaser to be free from defects in material
and workmanship as long as the consumer purchaser owns it. Dated proof of purchase must accompany all war-
ranty claims. PVD finishes carry a lifetime warranty in residential service.
Olympia Faucets, Inc. will replace, free of charge, to the original consumer purchaser, any and all parts that
prove defective under normal installation, use, and service. Damage as a result of misuse, abuse, accident, or
improper installation, will consequentially void this warranty. Replacement parts can be obtained from your local
dealer or directly from Olympia Faucets. Olympia Faucets, Inc. recommends using a certified plumber for all
faucet installation and repair.
This warranty is limited to replacement of defective parts only. Incidental and consequential damages, labor
charges, repair, or replacement costs are expressly excluded. Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives
you specific legal rights, as you may have other rights of which vary from state to state.
Installation or maintenance and cleaning must be in compliance with instructions furnished with every Olympia
product. If you find a problem with your product, please immediately contact your nearest Olympia Faucets, Inc.
dealer or sales representative.
* 2 year limited warranty on commercial and multi-family projects.
Shut off both hot and cold water supplies.
Remove handles (A1-A6), bonnet nuts (B), and
cartridges (C).
Check and replace springs and seats (D).
Reassemble handles (A1-A6), bonnet nuts (B), and
cartridges (C).
If seepage still occurs, replace cartridges (C).
Check the aerator (E) is tightened securely and
make sure the rubber washer is not damaged before
tightening the aerator back.
If leakage persists, check water supply line and
brass waterway hookups to make sure they are
tightly fastened.
Check if the sealant is intact and its sealing properly.
Check the aerator (E) is tightened securely and
make sure the rubber washer is not damaged before
tightening the aerator back.
Repeat Trouble Shooting "A" and clean any debris
trapped in the seats and springs (D).
Check Both sides of water supply valves are fully
open.
INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR OLYMPIA TWO HANDLE
LAVATORY FAUCETS
THIS PRODUCT MEETS THE FOLLOWING STANDARDS: ASME A112.18.1 ~ ANSI
A117.1 ~ ANSI / NSF 61, SECTION 9 ~ UPC / IAPMO LISTED / ADA COMPLIANT ~
COMPLIES WITH CALIFORNIA LEAD PLUMBING LAW
PRODUCT NUMBERS
#L-7220 Acrylic Handles ~ With 50/50 Pop-Up
#L-7221 Acrylic Handles ~ Less Pop-Up
#L-7222 Acrylic Handles ~ With Brass Pop-Up
#L-7290* Mini Blade Handles ~ With 50/50 Pop-Up
#L-7292*
Mini Blade Handles ~ With Brass Pop-Up
#L-7280* Lever Handles ~ With 50/50 Pop-Up
#L-7281* Lever Handles ~ Less Pop-Up
#L-7282* Lever Handles ~ With Brass Pop-Up
#L-7251G* ADA Wrist Blade Handles ~ With Grid Strainer
#L-7251* ADA Wrist Blade Handles ~ Less Drain
*ADA
Olympia Faucets, Inc. © 2009