Removing Belt - Panasonic MC-V9638 Operating Instructions Manual

Agitator Support
Support de l'agitateur
Soportes del agitador

Removing Belt

Tab
Languette
Pestaña
Base
- 38 -
Disconnect cleaner from electrical
outlet.
Check and remove hair, string and
lint build-up frequently in the POWER
NOZZLE brush and brush support
areas.
If build-up becomes excessive,
disconnect POWER NOZZLE from
wand and follow the steps below.
Remove light cover and light bulb
as shown under "REPLACING
HEADLIGHT BULB".
Unscrew the two (2) POWER
NOZZLE cover screws .
Turn POWER NOZZLE over.
To remove cover, insert screwdriver
at cover tabs on both sides and
twist to release tabs.
Turn POWER NOZZLE right side up.
Press handle release pedal and
lower the swivel.
Tilt cover forward from back until
front snaps free.
Carefully insert and twist
screwdriver at each brush support
to free brush from base.
Remove worn belt.
Slide agitator supports off to check
and clean agitator support areas.
See AGITATOR ASSEMBLY for picture
of complete brush assembly.