Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
VS1000 STANDS & TROLLEYS
(UNIVERSAL MOUNTS)
Screen Size: 33 - 70"
Guide Weights: 35-60kg
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier claims agent and
do not continue the installation until it has been reviewed. Please watch for pinch points. Do not put your fingers between
moveable parts. Do not tamper with or disassemble any spring loaded parts. Before installing, make sure that the supporting
surface will support five times the combined load of the solution and the hardware. Never exceed the maximum load
capacity. Please also layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or personal injury. This
product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or
lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676.
Revised 15/11/19
Advertisement
Related Manuals for Unicol VS1000
Summary of Contents for Unicol VS1000
- Page 1 01865 767676 sales@unicol.com www.unicol.com VS1000 STANDS & TROLLEYS (UNIVERSAL MOUNTS) Screen Size: 33 - 70” Guide Weights: 35-60kg *Please check model specific details before installing* WARNING Please carefully inspect the product before assembling. If you notice any apparent damage, call your carrier claims agent and do not continue the installation until it has been reviewed.
- Page 2 17mm 3/16th COMPONENTS DESCRIPTION DESCRIPTION 1500mm Plain Columns PS2 150mm Centre Mount Adapter VSS VS1000 Base Universal Fixing Kit 10cm Castors Set Screws (Grub Screws) Pozimount Non-Tilting Arms Alternative VS1000 Bases Pozimount Back Plate Optional VS1000 Accessories Revised 15/11/19...
- Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Place base upside down on the floor. Locate Placing the base upright again and locking the castors and push into the four holes until they click brakes on the castors, or ensuring the base is into place.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 5 STEP 6 Locate the mounting holes on the back of your Line the back plate up with the mount adapter, screen. Line the two mounting arms up and using as shown above. Fix 4 screws from behind the...