Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
VS1000
Screen Size: 33-70"
Guide Max. Weight: 35-60kg
Revised 15/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol VS1000
Summary of Contents for Unicol VS1000
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 Pozi Head Screwdriver 17mm Spanner 3/16th Allen Key Rubber Mallet COMPONENTS DESCRIPTION 1500mm Columns VSS VS1000 Base 10cm Castors Pozimount Non-Tilting Arms Pozimount Back Plate PS2 150mm Centre Mount Adapter Universal Fixing Kit Set Screws (Grub Screws) Alternative VS1000 Bases...
- Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 STEP 2 Place base upside down on the floor. Placing the base upright again and locking the Locate castors and push into the four holes until brakes on the castors, or ensuring the base is they click into place.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 6 STEP 5 Locate the mounting holes on the back of your Line the back plate up with the mount adapter, as screen. Line the two mounting arms up and using shown above. Fix 4 screws from behind the mount...