Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
VTS1 / VTS2
Screen Size: 40-110"
Guide Max. Weight: 60-110kg
Revised 15/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol VERTISLIDE VTS1
Summary of Contents for Unicol VERTISLIDE VTS1
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED Pozi Head Screwdriver 17mm Socket Wrench COMPONENTS DESCRIPTION VTS Body VTS Removeable Cassette VTS Arms Security Keys Drawer Handle (pre-attached) Revised 15/12/20...
- Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 POSITIONING OF SERVICES Partially unwind hex head screws to release arms. Do NOT position services within body of VTS Lift off arms and place aside. or within cassette path. HTS1: 1185x785mm | HTS2: 906x635mm Recommended position - either side of the VTS and behind the screen (size dependant).
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 5 STEP 4 Position your mount by ensuring that the handle of Return equipment tray to cassette and cable the mount will sit just above the edge of the screen up your media equipment using the cable (see below).