Advertisement
en | 7 | T50028
1 General Information
Product name:
Product type:
Product number:
Weight:
Max. load capacity:
Static test coefficient:
Intended Use:
The support serves for holding the 6-gear manual
gearbox 0B7 of the Crafter from 2006 in accordance
with the workshop manuals of the Volkswagen
Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Use only for loads up to 50 kg.
Only use in connection with the gearbox support
T10321 and the engine and gearbox trestle
VAS 6095/VAS 6095A (see workshop manuals of the
Volkswagen Group brands).
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-06-15
Gearbox support
Load holding device
T50028
4.8 kg
50 kg
3.0
Figure 1:
Gearbox support T50028
1
Support frame
2
Support bolt with hexagon nut M8-8 (2 pieces)
3
Spring connector (2 pieces)
4
Angle plate T50028/1
5
Hexagon screw M8x25 - 8.8
6
Bolt with securing ring for receiving the angle plate
7
Angle plate T50028/2
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Advertisement
Chapters
