Motion Detection - Niceboy PILOT Q8 Manual

Setting G-Sensor

Motion detection

GPS tracks
3) SETTING
Language
Setting the recording mode
Auto power off
Display automatic deactivation
Setting the G-sensor sensitivity. In response
to accident the G-Sensor will record the bump
direction and intensity, locking also the video being
recorded against inadvertent erasure. The videos
locked like this shall remain undeleted even when
the card becomes full!
Motion detection function on/off. The camera
shall automatically start up recorded whenever
recognizing a motion ahead of its lens. The
recording is stopped when the motion ceases (with
the function on). Use the motion detection only in
stationary car on parking and with the video loop
function off.
With the function on, the GPS information (speed,
coordinates) shall be forced into the videos
being recorded.
Setting the language.
Setting the recording mode.
Span of time after which the camera turns itself off
automatically.
Setting the screen saver time. The display screen will
fade out automatically after the set time is run out.
If a video was being recorded, it will continue being
recorded further on. The screen reactivates itself by
pressing any camera button. The display screen will
permanently be on with this function inactive.
35