Huawei WATCH GT 2 Pro Online Help Manual page 12

HUAWEI WATCH GT 2 Pro OnlineHelp
Charging time
Your watch will be fully charged within two hours. When the charging indicator
displays 100%, the watch is fully charged. Disconnect your watch from the power
adapter once it is fully charged.
Issue 01 (2020-09-10)
NO TE
● Use the dedicated charging cable, charging cradle, rated output voltage of 5 V, and
rated output current of 1 A or higher to charge your watch. Use a standard Huawei
charger with a rated output of 2A to charge the HUAWEI WATCH GT 2 Pro. Charging
the watch using a non-Huawei charger or a power bank may result in it taking a longer
time to charge, the device being unable to charge fully, overheating, or other similar
issues. Therefore, you are advised to purchase an official Huawei charger from an
official Huawei sales outlet.
● Use a Huawei power adapter or other power adapters that comply with local and
international security standards. Adapters that do not conform to the security standard
may cause security issues.
● Keep the surface of the charging cradle clean. Make sure the watch is placed properly
on the charging cradle and displaying the charging status. Avoid putting metal objects
on the medal contacts of the charger too long, or repeatedly sticking and removing
metal objects to the contacts, as this can result in short circuiting and other risks. (If you
are using a metal strap, make sure that the metal contacts on the watch are in proper
contact with that of the charger during charging. Try to keep the metal links of the strap
from touching the metal contacts of the charger.)
● Only the HUAWEI WATCH GT 2 Pro can be charged reversely using a phone. Currently,
the watch can be charged using the following phone models: HUAWEI Mate 20 Pro,
HUAWEI Mate 30, HUAWEI Mate 30 Pro, HUAWEI P30 Pro, HONOR V30, HUAWEI P40
Pro, and HUAWEI P40 Pro+.
● Do not charge or use your watch in a hazardous environment, make sure there is
nothing flammable or explosive nearby. When using the charging cradle, make sure
there is no residual liquid or other foreign objects on the USB port of the charging
cradle. Keep the charging cradle away from liquids and any flammable materials. Do
not touch the charging contacts while the device is charging, or take any other
unnecessary safety risks.
● There are magnets in the charging cradle, due to their nature they will also attract other
medal objects, so it is important to check for any before using the charger. The charging
cradle contains magnetic materials. It is important not to let it overheat by placing it
out in the sun or somewhere too warm.
● It is recommended that you lift the charging cradle to attach it to your watch. Ensure
that the side of your watch with buttons is aligned with the charging port of the cradle.
After the cradle and watch are connected properly, check to see if the charging icon is
displayed. If you cannot see the charging icon, you may need to slightly adjust the
position of the cradle until contact is established and the charging icon appears.
● When carrying and storing the charging cradle, make sure the charger stays dry,
especially the USB port on the base, clean it to prevent foreign objects from entering the
USB port, these can cause damage to the charger and may lead to other safety risks.
● Your watch will automatically power off when its battery level is too low. After it is
charged for a while, your watch will automatically power on.
Copyright © Huawei Technologies Co., Ltd.
1 Getting started
8