Cds - Panasonic SC-AK310 Operating Instructions Manual

CDs

CD selection
Choose CDs with this mark:
Do not:
•
use irregularly shaped CDs.
•
attach extra labels and stickers.
•
use CDs with labels and stickers
that are coming off or with
adhesive exuding from under
labels and stickers.
•
attach scratch proof covers or
any other kind of accessory.
•
write anything on the CD.
•
clean CDs with liquids. (Wipe
with a soft, dry cloth.)
•
use CDs printed with label
printers available on the market.
To prevent damage
Always observe the following points:
•
Load only 1 CD on the tray.
•
Load CDs as shown in the figure.
An adaptor is not needed with 8 cm CDs (singles).
8 cm CD
12 cm CD
•
Set the system on a flat, level surface.
•
Always unload all CDs before moving the unit.
Do not:
•
set the unit on top of magazines, inclined surfaces, etc.
•
move the unit while a tray is opening/closing, or when loaded.
•
put anything except a CD in the tray.
•
use cleaning CDs or CDs which are badly warped or cracked.
•
disconnect the AC power supply cord from the household AC outlet
during disc changing operation.
This unit can play CD-DA (digital audio) format audio CD-R and
CD-RW that have been finalized (a process that enables CD-R/
CD-RW players to play audio CD-R and CD-RW) upon completion
of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
8
RQT6693
XXXX XXXX XXXXX XXXX XX
XXXX XXXX XXXXX
XXXX XXXX XXXXX
XXXX XXXX
XXXXXX XXX XXXXXXX
XXXX XX XXXXX
XXXX XX XXXXX XXXX XX XXXXX
XXXX XXXX XXXXX XXXX XXXX XXXXX
x
1
Press [c, OPEN/CLOSE] to open the tray.
The unit comes on.
2
Set a CD in the tray.
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3
Press [1]–[5] to play your desired disc.
(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Display during play
(example):
Use the CD Play Mode function's ALL-DISC mode to play CDs in
succession. (A page 9)
To stop the disc play
Press [L, STOP].
The total number of tracks and total playing time are shown.
" " (SC-AK110: " ") indication
It indicates current disc has 16 or more tracks.
One touch play
During standby mode and when a CD is loaded, press [:/J, CD] or
[1] - [5].
The unit comes on and play starts.
To pause
To search forward/
backward
To skip forward/
backward
Notes
•
During 1-RANDOM or A-RANDOM play (A page 9), you cannot
skip to tracks already played.
•
During program play (A page 9), 1-RANDOM or A-RANDOM play,
you can search only within the track.
•
Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
CD display
You can display the remaining play time of the current track.
SC-AK310
Remote control only
Press [CD DISP] during play or pause.
SC-AK110
Press [-DISP/–DEMO] during play or pause.
Remote control: Press [CD DISP].
Every time you press the button:
Elapsed play time
Note
When track number 25 or greater is playing, remaining play time
display shows "– –:– –".
1 • 2
3
(Label must face upward.)
Current disc indicator
Press [:/J, CD] during play.
Press again to resume play.
Hold down [g/REW/3] (backward)
or [f/FF/4] (forward) during play or pause.
Press [g/REW/3] (backward) or
[f/FF/4] (forward) during play or pause.
Remaining play time
SLEEP SLEEP CLOCK CLOCK PL PLAY
AUTO OFF UTO OFF TIMER TIMER REC REC
DISC DISC
1 2 3
PROGRAM PROGRAM
4 5 6
S.SOUND EQ S.SOUND EQ
7 8 9
PRESET EQ PRESET EQ
0
10 10
CD CD
TUNER TUNER TAPE TAPE
BAND BAND
AUX AUX
VOL VOL VOL VOL
MUTING MUTING REW REW CLEAR CLEAR FF FF
CD DISP CD DISP DIMMER DIMMER PLAY MODE PLAY MODE