Turning The Demo Function Off; Convenient Functions; Auto-Off Function; Setting The Time - Panasonic SC-AK310 Operating Instructions Manual

Turning the demo function off

A demonstration of the display is shown if you have not set the clock.
You can reduce the power consumed in standby mode by turning it off.
During standby mode
Hold down [-DISP/–DEMO] until "NO DEMO" is displayed.
Every time you hold down the button:
NO DEMO (off) DEMO ON (on)
To show a demonstration of the display
-DISP/–DEMO] until "DEMO ON" is displayed.
Hold down [
Note
DEMO function cannot be turned on when Dimmer is on.

Convenient functions

To dim the display panel
Remote control only
Press [DIMMER].
The display is dimmed and the indicator is turned off.
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
Switching displays
Press [-DISP/–DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal Peak hold
(OFF)
To mute the volume
Remote control only
Press [MUTING].
Press the button again to cancel.
"MUTING" goes out.
To cancel from the unit, turn [VOLUME] to minimum (--dB), then raise
it to the required level.
Muting is also cancelled when the unit is turned off.
12
RQT6693
S.SOUND EQ S.SOUND EQ
PRESET EQ PRESET EQ
SC-AK310 only
Aurora

Auto-off function

Remote control only
SLEEP
–AUTO OFF
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner or AUX.
Hold down [–AUTO OFF].
"AUTO OFF" is shown on the display.
The setting is maintained even if the unit is turned off.
If you select tuner or AUX as the source, "AUTO OFF" goes out. It
comes on again when you select CD or tape.
To cancel
Hold down [–AUTO OFF] again.

Setting the time

SLEEP SLEEP CLOCK CLOCK PL PLAY
AUTO OFF UTO OFF TIMER TIMER REC REC
Remote control only
DISC DISC
1 2 3
PROGRAM PROGRAM
4 5 6
7 8 9
0 10 10
CD CD
TUNER TUNER TAPE TAPE
BAND BAND
AUX AUX
VOL VOL VOL VOL
MUTING MUTING REW REW CLEAR CLEAR FF FF
CD DISP CD DISP DIMMER DIMMER PLAY MODE PLAY MODE
This is a 12-hour clock.
1
Switch on the power.
2
Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK
Previous display
3
(within 7 seconds or so)
Press [g, REW/3] or [f, 4/FF] to set the time.
4
Press [CLOCK/TIMER] to finish setting the time.
The display will return to whatever was displayed before you set
the time.
To display the time
Press [CLOCK/TIMER] once when the unit is on or at standby mode.
The time is shown for about 5 seconds.
Note
Reset the clock regularly to maintain accuracy.
SLEEP SLEEP CLOCK CLOCK PL PLAY
AUTO OFF UTO OFF REC REC
TIMER TIMER
DISC DISC
1 2 3
PROGRAM PROGRAM
4 5 6
S.SOUND EQ S.SOUND EQ
8 9
7
PRESET EQ PRESET EQ
0
10 10
CD CD
TUNER TUNER TAPE TAPE
BAND BAND
AUX AUX
VOL VOL VOL VOL
MUTING MUTING REW REW CLEAR CLEAR FF FF
CD DISP DIMMER CD DISP DIMMER PLAY MODE PLAY MODE
PL PLAY
SLEEP SLEEP CLOCK CLOCK
AUTO OFF UTO OFF TIMER TIMER REC REC
DISC DISC
2 3
1
PROGRAM PROGRAM
4 5 6
S.SOUND EQ S.SOUND EQ
7 8 9
PRESET EQ PRESET EQ
0
10 10
CD CD
TUNER TUNER TAPE TAPE
BAND BAND
AUX AUX
VOL VOL VOL VOL
MUTING MUTING REW REW CLEAR CLEAR FF FF
CD DISP CD DISP DIMMER DIMMER PLAY MODE PLAY MODE
PLAY REC