Specifications; Product Service - Panasonic SC-AK310 Operating Instructions Manual

Specifications

AMPLIFIER SECTION SC-AK310
Power output
10% Total harmonic distortion
60 Hz–3 kHz, both channels driven
(Low channel) 40 W per channel (6 )
3 kHz–16 kHz, both channels driven
(High channel) 40 W per channel (6 )
Total Bi-Amp power 80 W per channel
Power output
10% Total harmonic distortion
1 kHz, both channels driven
(Low channel) 55 W per channel (6 )
10 kHz, both channels driven
(High channel) 55W per channel (6 )
Total Bi-Amp power 110 W per channel
Input sensitivity
AUX
Input Impedance
AUX
AMPLIFIER SECTION SC-AK110
Power output
10% Total harmonic distortion
60 Hz–16 kHz, both channels driven
60 W per channel (6 )
Power output
10% Total harmonic distortion
1 kHz, both channels driven
80 W per channel (6 )
Input sensitivity
AUX
Input Impedance
AUX
FM TUNER SECTION
Frequency range
87.9 – 107.9 MHz (200 kHz steps)
87.5 – 108.0 MHz (100 kHz steps)
Sensitivity
S/N 26 dB
Antenna terminal(s) 75 (unbalanced)
AM TUNER SECTION
Frequency range
520 – 1710 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 1000 kHz)

Product Service

1. Damage requiring service —The unit should be serviced by
qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change
in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing —Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing
to authorized servicing personnel.
3. Replacement parts —When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check —After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper working
condition.
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erasing system
Tape speed
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL (TYPE I)
S/N
Wow and flutter
Fast forward and rewind time
250 mV
13.3 k
CD SECTION
Sampling frequency
Decoding
Beam source/wavelength
Number of channels
Frequency response
Wow and flutter
Digital filter
D/A converter
250 mV
SPEAKER SECTION
Type
13.3 k
Speaker(s)
Woofer
Tweeter
Super tweeter
Impedance
HIGH
2.5 µV (IHF) LOW
2.2 µV Input power
HIGH
LOW
Output sound pressure level
Cross over frequency
Frequency range
560 µV/m
Dimensions (WxHxD) 227 x 344 x 243 mm
Mass
4 track, 2 channel
Solid permalloy head
Double gap ferrite head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
7
4.8 cm/s (1 / ips)
8
35 Hz – 14 kHz
50 dB (A weighted)
0.18% (WRMS)
Approx. 120 seconds with
C-60 cassette tape
44.1 kHz
16 bit linear
Semiconductor laser/780 nm
Stereo
20 Hz–20 kHz (+1, –2 dB)
Below measurable limit
8 fs
MASH (1 bit DAC)
SB-AK310
3 way, 3 speaker system
16 cm (6 1 / ˝) cone type
2
6 cm (2 3 / ˝) cone type
8
2.5 cm (1˝) Piezo type
6
6
110 W (Music)
110 W (Music)
86.5 dB/W (1.0 m)
3.5 kHz, 10 kHz
35 Hz–25 kHz (–16 dB)
47 Hz–24 kHz (–10 dB)
15 17 9
(8 / ˝ x 13 / ˝ x 9 / ˝)
16 32 16
3.3 kg (7.3 lb.)
Product information
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at
1-800-211-7262, or e-mail consumerproducts@panasonic.com,
or web site (http://www.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Centre
at 905-624-5505, web site (www.panasonic.ca), or an authorized
Servicentre closest to you.
SPEAKER SECTION SB-AK110
Type 2 way, 2 speaker system
Speaker(s)
Woofer 16 cm (6 1 /
2
Tweeter 6 cm (2 3 /
8
Impedance
Input power 160 W (Music)
Output sound pressure level
86.8 dB/W (1.0 m)
Cross over frequency
Frequency range 45 Hz–30 kHz (–16 dB)
60 Hz–26 kHz (–10 dB)
Dimensions (WxHxD) 220 x 330 x 227 mm
21
(8 / ˝ x 13˝ x 8
32
Mass 3.0 kg (6.6 lb.)
GENERAL
Power supply AC 120 V, 60 Hz
Power consumption
Dimensions (WxHxD) 250 x 330 x 370 mm
(9 27 / ˝ x 13˝ x 14
32
Mass 7.6 kg (16.7 lb.)
SC-AK310
SC-AK110 7.0 kg (15.4 lb.)
Power consumption in standby mode: 0.34 W
Notes:
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3.
SB-AK310 only
The labels "HIGH" and "LOW" on the rear
of the speakers refer to High frequency
and Low frequency.
˝) cone type
˝) cone type
6
4 kHz
15
/ ˝)
16
165 W
3 / ˝)
8
15
RQT6693