Cranes; Transitions; Parts Pack - VAKI Heathro Fish User Manual

Heathro Fish Pump Manual
3.8 Valves
On top of the swan neck there is a valve, this is used to release the vacum formed on the suction side
of the pump. If the suction hose gets stuck open this valve to get the air into the system and loosing
the vacum and releasing the suction hose.
On the main pump outlet there is a valve to empty and discharge the water on the outlet relieving
the water pressure before removing the outlet hose from the pump.
3.9 Connections and Reducers
There are different sizes of reducers and connections
with Heathro fish pump. The Camlock system is used for
quick and safe connection of hoses. The standard size is 6
" and 4" but 5"and 3" can also be ordered. The
connections are designed and manufactured so that
there are no sharp edges and the fish has a very gentle
treatment during pumping. Ensure that the rubber gasket
is in place so no air is sucked to the suction side.

3.10 Parts Pack

Many customers choose and buy a spare part package
consisting of key parts that can be easily replaced.
1 coupler element
2 Cover of the coupler element
3 Impellor for the Jabsco pump priming
4 Adapter ring for the motor
5 Jabsco shaft seal
6 EDPM rubber check valve gasket and the aluminum
plate
7 Drive belt (2 pcs.)
8 Jabsco gasket
www.vaki.is Page 7