Maintenance - VAKI Heathro Fish User Manual

Heathro Fish Pump Manual

4.2 Maintenance

After the first 24 hours of use:
1 Check the belts have proper tension
Daily Maintenance:
1 Flush the pump and motor with fresh water
2 Check Camlock connections.
3 Check mechanical parts.
Weekly maintenance
:
1 Lubricate the wheel bearing.
2 Make sure nothing is stuck in the drive belt cover. Check the belts are ok.
3 Check the air in the tires.
4 Check all hoses and connections for leaks
5 Lubricate the pump shaft bearing (under the main pump housing). IMPORTANT: before greasing
remove the screw on the opposite side of the shaft . Remember to replace the screw afterwards.
To switch on the remote control to the pump:
Push the red stop button on top of the remote.
Press Start twice and hold the button the second time , until the
remote control starts blinking green.
www.vaki.is Page 9