Verifying The Operation Of A New Or Replacement Part Using Navisphere Manager - EMC CLARiiON DAE2P Replacing Manual

Verifying the operation of a new or replacement part using
Navisphere Manager
Replacing a DAE2P/DAE3P LCC Module
8
1. Start Navisphere® Manager for the storage system by entering the
IP address in a browser window.
2. In the Navisphere Manager Storage tree, locate the icon for the
storage system in which you installed or replaced the part, expand
the storage-system icon, and select the Physical icon.
3. Expand the enclosure in which you installed or replaced the part,
and navigate to the part.
4. Verify that the part is in the enclosure and that it is not faulted.