Table of Contents
Advertisement
WCS-EIG310
Product Description
2
Product Description
2.1
Use and Application
The WCS-EIG310 interface module acts as an interface between the WCS read head and the
EtherNet/IP controller. Data is transferred between the WCS read head and the interface mod-
ule via an RS-485 interface. The data from the interface module to the control panel is trans-
ferred via the EtherNet/IP protocol.
You can connect a maximum of four WCS read heads of type LS221 (and/or LS121) to one
WCS-EIG310 interface module. If you connect several WCS read heads, they must have differ-
ent addresses. The number of connected WCS read heads is configured in the hardware proj-
ect settings.
2.2
Dimensions
The interface module housing has the following dimensions.
Figure 2.1
6
100
Dimensions
23
Advertisement
Table of Contents
