Table of Contents
Advertisement
WCS-EIG310
Commissioning
4
Commissioning
4.1
Introduction
Warning!
Danger to life due to defective work
Errors during installation and commissioning can cause life-threatening injuries and significant
property damage.
•
Installation and commissioning must only be carried out by trained personnel in accor-
dance with safety regulations.
Components
To commission the module, you will require the following components:
•
WCS-EIG310 interface module
•
EDS file (the EDS file can be obtained free of charge from our website www.pepperl-
fuchs.com).
•
Cordset from the interface module to the sensor
•
Connector for the EtherNet/IP connection to the interface module
•
Ethernet cable
•
10 VDC ... 30 VDC voltage supply
Downloading the EDS File
You will need an EDS file to operate the module described in this manual. The EDS file must be
imported into the corresponding configuration tool before commissioning the module. The EDS
file can be downloaded from our website: www.pepperl-fuchs.com. Simply enter the product
name or item number in the product/keyword field and click the "Search" icon.
1.
To access the product detail page for the device, go to http://www.pepperl-fuchs.com and enter
information about the device (e.g., the product description or the item number) into the search
function.
2.
Select your product from the list of search results. Click on the information you require in the
product information list, e.g., Software.
A list of all available downloads is displayed.
15
Advertisement
Table of Contents
