Advertisement
Prestige
Gas Valve Replacement
Kit Part Number
Each Kit Includes:
• Gas Valve
• Gas Valve Gasket
• Venturi/Blower Gasket
• Gas Valve Screws
WARNING
!
Indicates a potentially hazardous situation which,
if ignored, can result in serious injury or substan-
tial property damage.
WARNING
!
For your safety, turn off electrical power supply
at service panel and allow unit to cool before pro-
ceeding to avoid possible electrical shock and
scald hazard. Failure to do so can cause severe
personal injury or death.
2020-17 Prestige CTRLMax Gas Valve Replacement
Revised 1/10/2020
Description
PTRKIT111
Gas Valve Replacement
TCRKIT18
Gas Valve Replacement
Model
Prestige 250
Prestige 299/399
Recommended Tools:
• Adjustable Wrench
• Torx Screwdriver
• Phillips Head Screwdriver
NOTICE
Indicates special instructions on installation, operation
or maintenance, which are important to equipment
but not related to personal injury hazards.
WARNING
!
Failure to follow instructions below can result in
severe personal injury or damage if ignored.
•
Instructions are for a qualified installer/ ser-
vice technician only.
•
Read all instructions before proceeding.
•
Follow instructions in proper order.
1
Advertisement
Table of Contents
Related Manuals for TriangleTube PTRKIT111
Summary of Contents for TriangleTube PTRKIT111
- Page 1 Prestige Gas Valve Replacement Kit Part Number Description Model PTRKIT111 Gas Valve Replacement Prestige 250 TCRKIT18 Gas Valve Replacement Prestige 299/399 Each Kit Includes: Recommended Tools: • Gas Valve • Adjustable Wrench • Gas Valve Gasket • Torx Screwdriver • Venturi/Blower Gasket •...
- Page 2 Prestige Gas Valve Replacement 1. Preliminary Instructions: 1. Verify that the Gas Valve replacement kit is correct for the model of boiler. See table on page 1. 2. Carefully open and unpack the PARTS BOX from its shipping carton. 3. Carefully remove and check for any damage. NOTICE Do not proceed with installation and contact Triangle Tube right away if the gas valve is damaged in any way.
- Page 3 Prestige Gas Valve Replacement 3. Gas Valve Installation Instructions: WARNING 1a. (Prestige 250) Install the orifice and orifice gasket between the gas valve and venturi. Tighten the Do not check for gas leaks with an open flame. Use a three screws securing the gas valve to the venturi. bubble test.
- Page 4 Prestige Gas Valve Replacement NOTICE WARNING An adequate CH load must be present to dissipate the heat Failure to perform a complete combustion test at both generated during the combustion test. If an adequate CH high and low input rates may result in incomplete load is not available an indirect water heater can be used to combustion and the production of carbon monoxide, dissipate the heat by creating a DHW call which will enable...
Need help?
Do you have a question about the PTRKIT111 and is the answer not in the manual?
Questions and answers