GE Spacemaker Use And Care Manual page 12

HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your dishwasher's front panel to
match or blend with your new colors by flipping it over. Each side of each
panel is a different color. You may also paint a panel with a color of your
own choice.
How to Change the Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful-edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
Bottom Panel Attachment Screws
Wood Panel fiim Kifi
Wood panel trim kits, contain trim and
instructions for adding a decorative wood door
panel and lower access panel no thicker than 1/4"
to match kitchen cabinets.
Specify the trim color of your
choice from the following options:
The kit is available for $5.00 (shipping and handling).
Make check payable to the General Electric Co.
12
1. Remove the bottom panel attachment screws.
, Retaining
2. On models without top mounting screws, remove
the entire access assembly by lifting it up and over
the retaining tabs.
3. On models with top mounting screws, remove
the screws.
4. Take out the top trim screws and remove the
top trim.
5. Slide the color panel(s) up and out and put the
color you want in front.
6. Replace the top trim and screws.
7. Replace the entire access assembly by reversing
the steps.
Color Panel
If you have redecorated, and the color panels in
your dishwasher do not blend with your new color
scheme you may order one additional color panel
without charge.
Specify the color panel GPF26 HarvestiBlack.
Order a Wim Kit or a Color Panel from:
GE Appliances
c/o Dri-View Manufacturing
4706 Allmond Ave.
Louisville, KY 40209
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.