Metronome Settings; Metronome Sound - Gewa G9 Owner's Manual

Tip: The visual mode is designed to be vertically free floating. Place a finger the top of the
pop-up, hold down, and drag the box up or down into its desired position.
It is the only pop-up that won´t close automatically when leaving the performance mode.
As a practice tool it is considered to always stay in front. You can only close it manually by
tapping on [x] in the upper right-hand corner.
8.4.3 M
ETRONOME
In this function set you can customize the Metronome Sound as well as the channel for setting the
metronome speed by playing (Tap Channel).
8.4.3.1 M
ETRONOME
The metronome sound by default is "Metro". However, this can be changed easily:
1. Tap once on the [Metronome Sound] field.
2. (Optional) Preview metronome sounds:
a. Activate the [Play] button (make sure Click Volume is not muted).
b. Tap once on a sound (Metro, Claves etc.).
3. Select a sound by doing one of the following:
a. Select the preferred sound by double tapping.
b. Keep the currently selected sound by tapping on [x] in the upper right-hand corner.
This closes the dialog.
8.4.3.2 T C
AP HANNEL
You can also select a custom tap channel instead of using the [Tap] button. This function can be
found under the function set Metronome Settings. To choose a custom tap device, proceed as
follows:
S
ETTINGS
S
OUND

Metronome Sound

Metro