Silvercrest SKIL 32 A1 Operation And Safety Notes page 21

Discontinue use if any damage to the product or the
connection cable is detected!
If you notice smoke or unusual noise or odour, disconnect
the product immediately from the headphones socket .
Do not operate the product near heat sources, e .g . radiators
or other devices emitting heat!
Do not throw the product into fire and do not expose to high
temperatures .
Ensure that no direct heat sources (e .g . heating) can affect
the headphones .
Make sure that any contact with splashed and dripping
water and corrosive liquids is avoided and the headphones
are not operated in the vicinity of water . In particular, the
headphones should never be submerged in liquid; do not
place any vessels filled with liquid, for example, vases or
drinks, on or near the headphones .
It is necessary to repair the product if it has been damaged
in any way, for example, if the housing is damaged, if liquid
or objects have penetrated the device or if the product has
been exposed to rain or moisture .
Repair work is also required if the device is not working
properly or has been dropped . If smoke is produced, or
there are any unusual sounds or smells, disconnect the
product immediately . In such cases, the product should not
be used until if it has been inspected by authorised service
personnel . Only have the device repaired by qualified
personnel . Never open the housing of the product .
20 GB/IE