Installing The Gpu; Memory; Removing The Memory Module - Dell Precision 7920 Tower Owner's Manual

Installing the GPU

1. Align and place the GPU to the PCIe slot on the system board.
2. Press it down so that it is securely seated on the slot.
3. Connect the power cable to the GPU.
4. Lock both the blue clips forward on the filler bracket to secure the GPU to the system board.
5. Install the side cover.
6. Follow the procedure in

Memory

Removing the memory module

1. Follow the procedure in
2. Remove the following:
a) side cover
b) air shroud
3. Press the memory module retention tabs on each side of the memory module.
4. Lift the memory module out of the memory slot on the system board.
WARNING: Rotating the memory module out of the slot will cause damage to the memory module. Ensure to pull it
straight out of the memory module slot.
72 Removing and installing components
After working inside your computer.
Before working inside your computer.