Operation; Switching On And Off - Schaudt CSV 409 Instruction Manual

5.1
5.1.1
5.1.2
8050101 BA / EN
CSV 409 A caravan charging system instruction manual
5

Operation

Operation of the caravan power supply occurs exclusively via the connected
control and switch panel.
The CSV 409 A caravan charging system does not require daily operation.
Settings only have to be carried out once if the battery type is changed
(lead-acid or lead-gel), during initial start-up or when retrofitting accessories
(see chapter 5.3 and the CSV 409 A installation instructions).

Switching on and off

Control and switch panels of type LT ...
The control and switch panels of type LT ... are supplied with individual ope-
rating instructions included with the vehicle. Please refer to these instruc-
tions for operating information.
Switch panel ST 05
Fig. 3 Switch panel ST 05
In the simplest case, the switch panel ST 05 is connected to the caravan
power supply. It simply has a rocker switch with neutral position.
The 12 V supply to the living area is switched on via the switch. Exception:
Compressor/AES refrigerator control
F
When starting these consumers for the first time after switching off the
Y
CSV 409 A caravan power supply, replacing the battery or reconnecting
the leisure battery after a longer period, the 12 V main switch on the
switch panel must be switched on briefly.
 Press the left-hand button briefly.
The 12 V power supply to the living area is switched on.
 Press the right-hand button briefly.
The 12 V power supply to the living area is switched off.
Issued: 20.02.2020
7