Application And Function - Schaudt CSV 409 Instruction Manual

8050101 BA / EN
CSV 409 A caravan charging system instruction manual
DANGER!
Y
Incorrect installation!
Electrical shock or damage to the connected device:
The device must be installed in accordance with the installation
F
instructions.
The mains connection line may only be replaced by an authorised cu-
F
stomer service department or by qualified persons.
WARNING!
Y
Hot components!
Burns:
Blown fuses may only be changed after the power to the system has
F
been disconnected.
Blown fuses may only be replaced when the cause of the fault is
F
known and eliminated.
Never bypass or repair fuses.
F
The back of the device can get hot during operation. Do not touch.
F
Only use original fuses rated as specified on the device.
F
Never store heat sensitive objects close to the device (e.g.
F
temperature sensitive clothes if the device has been installed in a
wardrobe).
3

Application and function

This device is not intended to be used by persons (including children)
Y
with limited physical, sensory or mental aptitude or lack of experience
and/or knowledge unless they are supervised by a person responsible for
their safety or have received instruction from this person as to how the
device is used.
Children are to be supervised so as to ensure they do not play with the
device.
This device is intended for installation in a vehicle.
Caravan charging system
CSV 409 A
ST ... switch panel
12 V consumer
Fig. 1 Onboard power supply system
Issued: 20.02.2020
Lighting
Pump
Heater
+
etc.
Caravan battery
Solar control
LR ...
(accessory)
230 V AC
+ --
Starter battery
--
Towing vehicle
3