Setting Judgement Condition; General Information On Judgement Condition - Panasonic IMAGECHECKER PV230 Manual

2.6 Setting Judgement Condition

2.6.1 General Information on Judgement Condition

With Character recognition checker, passing status can be judged for each recognized character by comparing
to the date and time based on the specified strings or built-in calendar. Set the criteria and conditions for
passing status in Judgement Condition menu.
Judgement is performed on each recognized character, and the result is output as "Judged Character". When
the judgement is OK, "Recognized Character" is output. When the judgement is NG, "?" is output.
Recognized characters
Judgement characters (or Calendar)
Judged characters
Judged characters or judgement result of each character can be output to "Judgement", "Numerical
Calculation" and "Data R/W".
Judgement Conditions
The following judgement conditions are available. It judges OK only when each recognized character meets all
the specified judgement conditions.
Judgement Type
It sets whether to specify arbitrary characters or refer to the date of the built-in calendar for the character string
to be compared with the recognized characters.
Judgement Type: in case of Character
It judges the object as Yes or No by comparing the character string specified in "Judgement Characters" with
the recognized character string.
•
Judgement Character:
Specify character strings to be the acceptance criterion.
•
No. of Characters Judgement:
It judges the object based on the number of recognized characters. Only when the result of No.
of characters judgement is OK, judgement characters are compared with recognized
characters.
Judgement Type: in case of Calendar
It judges the object as Yes or No by comparing the date based on the built-in calendar (Year/Month/Day/Time)
with the recognized character string.
•
Calendar Condition:
Specify the format selection of date and the offset value from the date of the built-in calendar.
Judgement Character Size
It judges the object based on the size (area, width, height) of recognized characters. As for the character size,
select either specifying by label of dictionary or by recognized character number.
It is used for simply examining the print quality of characters after character recognition.
Period Identification
When the segmented character is smaller than the specified width and height, it is automatically recognized as
a period.
40