Table of Contents
Advertisement
Step 9: Initializing the Destination Disk
Again, you get to make a decision.
You see the following information:
Initializing destination disk
Before loading HP-UX
Following the information you see a question:
Do you want to initialize your destination disk? (Enter y or n)
» _
Take one of the following actions:
• Press
0
if you have any of the following conditions:
o The destination disk has never been used.
o You know or suspect the disk is corrupt.
o You have used the disk for some time and want the disk hardware to
re-format and initialize the disk and media .
• Otherwise, press
®
and go to Step 10.
If you enter
0,
you get the following display:
HP-UX INSTALLATION UTILITY -- EXECUTION TRACE
It will be about
yyyy
before any input is required.
Initializing destination disk.
yyyy varies according to
your disk
When the initialization is complete, go on to Step 10. Otherwise, go to Step 10
now.
Installing the HP-UX Operating System
2-15
Advertisement
Table of Contents
