Step 4. Leveling The Dishwasher - Samsung DW60H9970 Series Installation Manual

Installing your dishwasher
STEP 4. LEVELING THE DISHWASHER
Min.
4
4 mm
2
Normal : 0-30 mm
Tall-kitchen : 30-60 mm
1. Make sure that the product is level using the leveler.
2. You can adjust the height of the front of the product by turning the legs at both ends of the bottom front
of the product.
1) Slightly lift up the front of the product (when put in half way) and turn the legs to adjust the height.
2) You can adjust the height.
3. You can adjust the height of the front of the product by turning the legs with a Torx T20 screwdriver.
Turn it clockwise to lower the height or turn it counterclockwise to raise the height.
4. Install the product so that there is a space of at least 4 mm between the top of the product and the
bottom of the counter top.
When the leveling is complete,
check if the inner door opens and
closes without interfering with the
tub.
14_ Installing your dishwasher
BU-Install_DD68-00160B-07_EN.indd 14 BU-Install_DD68-00160B-07_EN.indd 14
3
Tall-kitchen
(Change to the Foot Sub)
2017-02-08 2017-02-08 1:28:47 1:28:47