Step 7. Completing The Installation - Samsung DW60H9970 Series Installation Manual

STEP 7. COMPLETING THE INSTALLATION
1. Open the door and remove all foam, paper packaging, and unnecessary parts.
2. Turn on the circuit breaker you turned off before you began the installation.
3. Open the water supply valve to supply water to the dishwasher.
4. Turn on the dishwasher, and then select and run a cycle.
Check if the power turns on correctly and if there is any water leakage while the dishwasher is
operating.
Make sure to check for water leakage on both ends of the water supply line and drain hose
connector.
CAUTION
5. To install the kick plate, refer to the fi gure below.
1) Install the 'Felt Lower' onto the inside of the
'Kick Plate'.
2) Models that are not equipped with the adjustable leg
3) Models that are equipped with the adjustable leg
7
5
5
Assemble the bracket in the right direction and order as shown in the fi gure.
BU-Install_DD68-00160B-07_EN.indd 19 BU-Install_DD68-00160B-07_EN.indd 19
8
7
Big
Big
Install over
small
Small
96.5mm
Install over 96.5mm
small
Small
Big
Big
Installing your dishwasher
4
_19
2017-02-08 2017-02-08 1:28:48 1:28:48