Connecting To Your Tv; Method 1. Connecting With A Cable - Samsung HW-K360 User Manual

5. While the subwoofer's indicator is blinking blue, press the
side of the main unit to turn on the main unit.
6. The connection is complete if the indicator on the rear of the subwoofer stops blinking and glows
continuously.
c If the connection process fails, the blue indicator will flash continuously. Go back to Step 2 and start again.
Expand to true wireless surround sound by connecting the Samsung Wireless Rear
Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)
c For further information, refer to the Web Manual.

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.
c Important: Before you begin, put the battery into the remote. See page 12 for instructions.

Method 1. Connecting with a Cable

Check the DIGITAL AUDIO IN (OPTICAL)
port of the main unit.
Bottom of main unit
1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with
a digital optical cable.
2. Press the button on the right side of the Soundbar or the SOURCE button on the remote control to
select the D.IN mode.
c If you have connected the main unit to a TV with a digital optical cable, you can set Auto Power Link to ON
and have the Soundbar turn on automatically when you turn the TV on.
c This function is only available when the Soundbar is in the D.IN mode.
Optical Cable
DIGITAL AUDIO IN
(OPTICAL)
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
AUX IN
· 5 · English
button on your remote control or on the right
OPTICAL OUT
DC 19V
D.IN
Check the OPTICAL OUT
port of your TV.