Storage; General Storage Instructions; Storage During Working Breaks; Replacement Parts/Accessories - Grizzly MTS 43-14 E2 Translation Of The Original Instructions For Use

GB

Storage

General Storage Instructions

• Clean the equipment and accessories
carefully before storage.
• Keep the equipment in a dry and dust-
proof place out of reach of children.
• Do not wrap the equipment in plastic
bags, as damp and mould may form.
• Do not store the equipment on the
protective cover; ideally hang it from
the top handle.
Storage During Working
Breaks
Non-observance of the storage
instructions can cause starting
problems or permanent damage
as a result of fuel residues in the
carburettor.
1. Drain the fuel tank in a well-ventilated
place.
2. Start the engine and allow it to tick
over until the engine stops and the
carburettor is free of fuel.
3. Allow the engine to cool (approx. 5
minutes).
In case of working breaks of more than
3 months:
4. Loosen the spark plug with a spark plug
wrench (see "Changing/Adjusting the
Spark Plug").
5. Pour a teaspoon of pure 2-stroke oil
into the combustion chamber and pull
the starter cable slowly several times to
distribute the oil inside the engine.
6. Reinsert the spark plug.
108
Replacement parts/
Accessories
Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre (see "Grizzly
Sercice-Center").
Alternatively, you can obtain a 2.5 mm thick
nylon thread from specialist retailers and
wind this onto the thread reel yourself.
Ensure that the thread lies parallel in the
two thread channels and is wound in the
opposite direction to the engine rotation di-
rection. The engine rotation direction is indi-
cated with an arrow on the protective cover.
Furthermore, the thread reel must not be
overfilled, otherwise the thread mechanism
will not function correctly.