Changing The Fuel Filter; Adjusting The Carburettor; Maintenance Interval Table - Grizzly MTS 43-14 E2 Translation Of The Original Instructions For Use

Changing the Fuel Filter

(Pic. 14)
Never operate the equipment
without a fuel filter. Change the
fuel filter regularly.
1. Drain the fuel tank (2) into an appro-
priate container.
2. Pull the fuel suction head (50) out of
the tank with a hook and turn to pull it
off.
3. Replace the fuel filter and place the
removed suction head back in the
tank

Maintenance Interval Table

Regularly carry out the maintenance operations listed in the following table. The life of
the saw is extended by regular maintenance of your chainsaw. Furthermore, you get
optimum cutting performance and avoid accidents.
Machine Part
Screws, nuts, bolts
Air filter
Fuel filter
Spark plug
Fuel hoses
Complete machine
Operating handle
Cutting head
pic. 14
2

Adjusting the Carburettor

The carburettor is preset in the factory for
optimal performance. If subsequent ad-
justments are required, have them carried
out by a specialist workshop.
Action
Check, tighten
Clean or replace
Replace
Clean/adjust/replace
Check, replace if necessary
Check, clean if necessary
Check for function
Check correct installation
Operating Hours
Before
Each Use
10







GB
50
20

107