Positioning The Toilet Seat - Dometic CT4110 Operating Manual

Using the toilet
➤ Set the cassette tank upright and rotate the drain pipe 90° upward (fig. 4,
page 4).
I
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come
off.
➤ Twist off the cap (fig. 5, page 5).
➤ Hold the cassette tank by the handle with one hand (fig. 0 3, page 7) and
with the other hand on the slider (fig. 0 2, page 7), so that you can push the
vent button (fig. 0 1, page 7) while it is draining.
➤ Press the vent button when the drain pipe points downwards.
✓ The tank drains steadily and without splashing.
➤ After draining, rinse out the cassette tank carefully.
➤ Add a sanitary additive to the cassette (chapter "Adding sanitary additive" on
page 22).
➤ Clear away course dirt from the wheels of the cassette tank to prevent scratching
of the cassette housing.
A
NOTICE!
Do not clean the inside of the cassette tank with a high-pressure cleaner.
This can damage the float for the level indicator.
➤ Push the cassette tank into the cassette housing (chapter "Pushing the cassette
tank into the cassette housing" on page 22).
6.5

Positioning the toilet seat

The toilet seat can be swiveled continuously (fig. a, page 8).
24
CT4110, CTS4110
EN