Hyundai HiE-S SG Series Installation Manual page 9

9) If the connectors need to be disconnected, installer should use the exclusive tool to disconnect them
after safety measure such as cut-off of connection band.
10) Connected cables and connectors should be fixed.
11) Action against contamination or corrosion should be enacted on disconnected connectors.
5.7 Conduit
For conduit application, it is necessary to follow the regulation for outdoor installation of conduit. All
fixing parts should be protected from any damage and moisture.
5.8 Diode
When there is partial shade on a PV module, reverse-voltage can occur inside PV module. In order to
protect this phenomenon, the diodes are normally installed in the Junction Box. HES PV modules are
equipped with bypass diodes. If installer wishes to change into other diodes, the installer should inform
an authorized engineer of HES.
Object
Junction Box
Bypass diodes
Photovoltaic Technology
Cable
Connectors
Object
Tongwei solar(Hefei) Co.,
Junction Box
Starsea Electronics
Bypass diodes
Yangzhou Yangjie
Electronic Technology
Cable
Photovoltaic Technology
Connectors
Sales Office
4th Fl., First Tower,
55, Bundang-ro, Bundang-gu,
Seongnam-si, Gyeonggi-do,
13591 Korea
Picture 5. Connect connectors
Manufacturer
Zhejiang Renhe
Co., Ltd.
H1Z2Z2-K 1 x4.0 mm
PV-KST4-EVO 2/xy_UR
Staubli
PV-KBT4-EVO 2/xy_UR
Manufacturer
PVJB-TW-S/001
Ltd.
Changzhou
H1Z2Z2-K 1 x4.0 mm
Zhejiang Renhe
Co., Ltd.
PV-KST4-EVO 2/xy_UR
Staubli
PV-KBT4-EVO 2/xy_UR
Page 9 of 13
Type
Max. Voltage=1500 V (DC)
GF26xy
Rated current = 15 A RTI = 110℃
PST6020
PST4530/T
2
05-8
Rated Current = 45A (4.0mm
Type
Max. Voltage=1500 V (DC)
Rated current = 15 A RTI = 110℃
PST6020
GF3045MG
2
05-8
Rated Current = 45A (4.0mm
Factory
313, Soi-ro, Soi-myeon, Eumseong-gun,
Chungcheongbuk-do 369-872, Korea
www.hyundai-es.co.kr
Technical Data
Tj max = 200°C If = 20A
Tj max = 200°C If = 20A
Rated voltage = 1500VDC
Rated voltage = 1500VDC
Rated current = 30A
Rated Voltage = 1500VDC
Technical Data
Tj max = 200°C If = 20A
Tj max = 200°C If = 30A
Rated voltage = 1500VDC
Rated voltage = 1500VDC
Rated current = 30A
Rated Voltage = 1500VDC
2
)
2
)