Transportation, Storage And Unpacking - Hyundai HiE-S SG Series Installation Manual

2. Transportation, Storage and Unpacking

· Modules are packaged vertically. They should also be vertical during transportation.
· Check tension of banding tapes before transportation. Be cautious of abnormal shock for vehicles
and modules which might cause module damage and cell crack during transportation. Store the
modules safely in a dry and cool environment.
· Do not stack or move more than two packages of modules which are stacked vertically.
· Workers are recommended to keep some distance from the package when one worker cuts banding
tapes. Don't lift the package after removing banding tapes.
· After unpacking, please visually check if there is no problem on modules. Install modules and
components without any defect.
· When carrying modules, do not hold cables or junction box. Carry by holding frames with two hands.
· Carry one module at one time.
Sales Office
4th Fl., First Tower,
55, Bundang-ro, Bundang-gu,
Seongnam-si, Gyeonggi-do,
13591 Korea
Page 3 of 13
www.hyundai-es.co.kr
Factory
313, Soi-ro, Soi-myeon, Eumseong-gun,
Chungcheongbuk-do 369-872, Korea