Appendix 1) Module Installation Instruction - Hyundai HiE-S SG Series Installation Manual

Appendix 1) Module Installation Instruction

Method
Bolting
Clamping
:Clamping area
Long Bar
※ Min. Clamp
Width: 50mm
Note 1) Certified by TUV-NORD
2) The Mounting method has been qualified by HES, and the mechanical load tests are based on
IEC61215 ed.2.
Sales Office
4th Fl., First Tower,
55, Bundang-ro, Bundang-gu,
Seongnam-si, Gyeonggi-do,
13591 Korea
Overlap of Clamp with Al frame
: 8-10mm
on
A: 330±50mm
3600/1600Pa or 2400/2400 Pa
Page 12 of 13
(Front / Back Design Load, Safety factor = 1.5)
SG
4 Bolts : 1600/1600 Pa
8 Bolts : 3600/1600 Pa
www.hyundai-es.co.kr
SI
Overlap of Clamp with Al frame
: 9-11mm
A: 330±50mm
Design load 2400/2400Pa
A: 330±50mm, B: 971±50mm
Design load 3600/1600Pa
Factory
313, Soi-ro, Soi-myeon, Eumseong-gun,
Chungcheongbuk-do 369-872, Korea