Connecting; Power Supply - MSI MS-1057 Manual

Connecting

Pay attention to the following information, in order to connect
your notebook correctly:

Power supply

• Do not open the power adapter housing. When the housing
is open there is a danger of severe electric shock. It con-
tains no user-serviceable parts.
• The electric outlet must be in the vicinity of the notebook
and within reach of the power adapter cables.
• To disconnect your notebook from the power source, or set
the notebook to battery operation, remove the power cord
from the notebook's power socket.
• Only use the notebook with a power adaptor operating at
AC 115V~/60 Hz. In European countries use the notebook
at AC 220-240V~/50 Hz.
For details on power consumption, please refer to the rating
plate on the rear of your notebook. If you are unsure of the
type of power supply available at the point of use, ask your
local power company.
• Use only the supplied power cord and power adapter.
• If using an extension cord, make certain that it meets your
local safety requirements. If in doubt, consult an electrician.
• To provide additional protection against electric shock,
power surges, lightning strikes, or other electrical damage
to your notebook, we recommend the use of a surge pro-
tector.
• Firstly remove the plug, and then the connector of the
notebook, from the power source, if you want to detach
the network adapter from the mains power supply. A re-
verse sequence could damage the network adapter or the
notebook. Always hold the connector firmly when removing
it. Never pull on the power cord.
Safety Instructions
7