Tv Timer Features; On-Timer With Alarm; On-Timer Indicator - Panasonic PV-DM2793 Operating Instructions Manual

TV Timer Features

ON-TIMER with Alarm

This unit can be set to automatically power on in one of
4 modes (TV, VCR Playback, FM radio, or DVD/Video
CD/CD.) You can also combine the On-Timer with a
one minute alarm that gradually increases in volume.
1 Press PROG* to display SET PROGRAM
screen.
2
SET PROGRAM
T I MER PROGRAMM I NG
ON T I MER
S LEEP T I MER : 00
SELECT :
SET : SET
END : PROG
3
ON T I MER
ALARM : ON
SELE CT HOUR
SELECT :
SET : SET
END : PROG
• ON-TIMER mode
selection order
CH02 CH03
CH01
FM9 FM8
DVD
4
ON T I MER
ALARM : ON
SELE CT ALARM
CANCEL : ADD / DLT
SELECT :
SET : SET
END : PROG
When "ON" is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use and
Press PROG to set ON TIMER.
5
• "ON TIMER SET" is displayed.
• ON-TIMER Indicator lights up on the unit.
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to clear
the time in step 3. Now, press PROG to end.
"ON TIMER END" briefl y appears on-screen.
26 26
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
1) Press
"ON TIMER."
2) Press SET to
display ON TIMER
screen.
1) Press
desired settings.
2) Press SET to set
the ON-TIMER
time or ON-TIMER
mode.
• Make sure a tape is
inserted if Playback
mode is selected.
• Make sure a disc
is inserted if DVD
(DVD/Video CD/CD)
CH125
mode is selected.
• See "FM Radio" on pages
VCR
28 and 29 for instructions
FM1
on how to preset FM
stations.
Press
ALARM "ON" or
"OFF."
BACK :
to move back and correct.
to select
to select
Sleep Timer
This unit can be set for auto power off.
Press PROG to display SET
1
PROGRAM screen.
2
to select
SLEEP TIMER 30
To cancel,
press SET repeatedly until 00 appears.
Press PROG to return to the normal
3
screen.
• Pressing DISPLAY with sleep timer set
Note
• If no button on the remote or unit (including a
button used to turn off the alarm) is pressed
within 60 minutes after unit turns itself on, it will
turn itself back off.
Check List
The clock is set to the correct time.

ON-TIMER Indicator

1) Press
SET PROGRAM
T I MER PROGRAMM I NG
ON T I MER
S LEEP T I MER : 00
2) Press SET
SELECT :
SET : SET
END : PROG
60 90 00
displays remaining time.
to
select SLEEP
TIMER.
repeatedly to
select the
desired time.