Selecting Input Mode; Copy Your Tapes (Dubbing) - Panasonic PV-DM2793 Operating Instructions Manual

Copy Your Tapes (Dubbing)

* Important: If a remote control button does not work when pressed, press the TV/VCR button on the remote
and try the button again.
Connections you'll need to make
Playing (Source) VCR
R-AUDIO-L
OUT
IN
Playback (Source)
1
2
3
(Perform operation of steps 4 and 5 on both units at same time.)
4
5
STOP
Caution
• Unauthorized exchanging and/or copying
of copyrighted recordings may be copyright
infringement.
• Please note that some tapes cannot be dubbed on
this unit. Also, it is not possible to dub
CD/CD to VHS tape using this unit.
VID EO
IN FROM
MONO
OUT TO
Insert pre-recorded
tape.
Press PLAY then press
PAUSE at starting point
to put in Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
DVD/Video
Recording (Editing) unit
ANT.
VIDEO IN
TV
Recording (Editing) unit
Select "LINE" mode.
See "Selecting Input Mode" below.

Selecting Input Mode

Method 1:
Press CH . The display will change as
follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press
for SET UP TV screen.
c Press to select "INPUT SELECT," and then
press SET to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
L-AUDIO IN-R
Insert blank tape with
record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results.
Press REC, then press
STILL/PAUSE immediately to
put in Standby mode.
Press STILL/PAUSE to start
dubbing.
Press STOP to stop dubbing.
1
2 3
(CABLE)
LINE 125 or
to select "TV," then press SET
(TV)
69
19 19