Communications; Interfaces And Requirements - SATO Argox D4-280plus User Manual

Hide thumbs Also See for Argox D4-280plus:

Table of Contents

D4-280plus

User Manual

3.3 Communications

This printer comes with USB type A and type B interfaces, a nine-pin Electronics

Industries Association (EIA) RS-232 serial data interface and an Ethernet module.

 USB Interface Requirements

The Universal Serial Bus (USB) interface is compatible with your existing PC

hardware. The USB's "plug and play" design makes installation easy. Multiple

printers can share a single USB port/hub. The different usage of type A and B as

below.

USB type A

USB Flash drive, USB keyboard or USB Scanner.

USB type B

PC to set printer.

 Serial (RS-232) Port

The required cable must have a nine-pin "D" type male connector on one end, which

is plugged into serial port located on the back of the printer. The other end of the cable

connects to a serial port on the host computer. For technical and pin-out information,

please refer to

RS-232C

in this manual.

Table of Contents