Gardenline Xfinity 57431 User Manual page 20

AUS
Commissioning/Troubleshooting
• Empty the grass catcher.
• Before hooking, remove any obstructions from the cutting area.
Working without the grass catcher
Whenever you detach the grass catcher, the deflector flap drops down. When
working without the grass catcher, the mowed grass is ejected directly down-
wards.
Tips on lawn care
Here are some tips to help you keep your lawn looking healthy and ensure uni-
form growth:
• Lawns consist of various grass types. Frequent mowing promotes the growth
of grass, resulting in strong roots and a firm sward. If you seldom cut the grass,
you will enhance the development of highgrowing types of grass and other
weeds, such as clover, daisies).
• The normal height of a lawn is approx. 4–5 cm. Only one third of the total height
should be mown; therefore cut 7–8 cm long grass to normal height.
• Try not to cut the grass shorter than 4 cm, otherwise the lawn will suffer during
dry periods.
• If the grass has grown particularly high (for example, during a holiday period),
cut it back to its normal height in several stages.
• When mowing, always overlap the mown swaths slightly.
IX. Troubleshooting
Fault
The motor fails to
start
20
 support@scheppach.com.au
MODEL: 2x 20V Lawn Mower PRODUCT CODE: 57431 10/2017
Possible causes
• The capacitor is defective.
• The connectors have become
separated from the motor or
the capacitor.
• The mower is standing in high
grass.
• The mower housing is
clogged.
• Safety plug is not inserted.
• Battery is not correctly insert-
ed.
Remedies
• The mower housing is
clogged. Have repaired
by the Customer Service
Center.
• Have repaired by the
Customer Service Center.
• Start in low grass or on
an area that has already
been mowed; change the
cutting height if neces-
sary.
• Clean the housing so that
the blade moves freely.
• Insert safety plug
• Remove the battery and
reinsert.
AFTER SALES SUPPORT
1300 855 831
