Communication Settings; Control Commands - Panasonic PTAE2000U-EC Operating Instructions Manual

Communication settings

Signal level RS-232C
Sync. method Asynchronous
Baud rate 9 600 bps
Parity None

Control commands

Command Control contents
PON
POWER ON
POF
POWER OFF
IIS
INPUT
OMN
MAIN
OEN
ENTER
OBK
RETURN
OCU/OCD/
Navigation buttons
OCL/OCR
OLE
LENS
OST
DEFAULT
OFZ
FREEZE
OOT
SLEEP
OSH
BLANK
OVM
PICTURE
OWM
WAVEFORM
VS1
ASPECT
VPM
PICTURE MODE
Character length
X parameter
S parameter
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
If a PON command is received while the cooling fan is operating after the lamp has switched
off, the lamp is not turned back on again straight away in order to protect the lamp.
Parameter:
CP1 = COMPONENT1 IN
SVD = S-VIDEO IN
HD1 = HDMI1 IN
HD3 = HDMI3 IN
Displaying the main menu.
Activating the selected items in the menu mode.
Returning to the previous menu or escaping from the menu mode.
OCU = F button
OCD = G button
Activating the LENS CONTROL menu.
Resetting to the factory default setting. (page 22)
Freezing the projected screen.
Parameter:
0 = OFF
Setting the duration of time to turn off the power automatically. (page 25)
0 = OFF 1 = 60min.
5 = 180min. 6 = 210min.
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
Activating the PICTURE menu. Send the command to switch menu items. (page 25)
Activating the WAVEFORM.
Parameter:
0 = OFF
1 = FULL SCAN (Y)
2 = FULL SCAN (R)
3 = FULL SCAN (G)
4 = FULL SCAN (B)
Switching the aspect ratio. (page 23)
Switching the PICTURE MODE. (page 25)
Parameter:
NOR = NORMAL DYN = DYNAMIC CL1 = COLOR1
CN1 = CINEMA1 CN2 = CINEMA2 CN3 = CINEMA3
Technical Information
8 bits
Stop bit 1 bit
None
None
Remarks
CP2 = COMPONENT2 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
OCL = I button
OCR = H button
1 = ON
2 = 90min. 3 = 120min.
7 = 240min.
(page 24)
5 = SINGLE LINE SCAN (Y)
6 = SINGLE LINE SCAN (R)
7 = SINGLE LINE SCAN (G)
8 = SINGLE LINE SCAN (B)
CL2 = COLOR2
4 = 150min.
E
NGLISH - 49