Panasonic PTAE2000U-EC Operating Instructions Manual page 13

Back and bottom view
Air intake port
Front leg adjusters
Screw up/down to adjust the
projection angle. (page 15)
COMPUTER IN
Connect an RGB signal cable
from your PC.
Connecting
terminals
(page 18)
HDMI IN
Connect HDMI signal cables.
NOTE:
• Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.
• The projector should only be used with the attached power cord to ensure optimum performance and avoid damage to the
projector.
• Do not open the top cover other than replacing the lamp unit.
Security lock
Attach the commercial shackle lock
which is provided with the projector.
Compatible with the Kensington
MicroSaver Security System.
(page 51)
Lens cover attachment hole
COMPONENT IN
Connect YP
About Your Projector
Top cover
Hold at the back corner of the top
cover and slightly push up to open.
(page 44)
AC IN
Connect the power cord to
supply electronic power to the
projector. (page 19)
Safety cable attachment point
Attach the safety cable when
mounted in the ceiling.
(page 51)
Front leg adjusters
Screw up/down to adjust the
projection angle. (page 15)
P signal cables.
B R
SERIAL
Connect a compatible cable for
controlling the projector
remotely via your computer.
(page 48)
Air intake port
S-VIDEO IN
Connect a S-VIDEO
signal cable.
VIDEO IN
Connect an RCA
composite video cable.
E
NGLISH - 13