Panasonic PTAE2000U-EC Operating Instructions Manual page 17

Projector location range
You can determine where to locate the screen and the projector by considering the lens shift possibilities. See
"Positioning the image" on page 21.
When the screen position is fixed
When the projector position is fixed
NOTE:
• When the projector is located right in front of the screen and the lens shift dials is centered, you will get the best quality of
the projection image.
• When the Lens shift dial • Vertical is at the vertical limit of the shift range, you cannot turn the dial to the horizontal limit,
likewise when the Lens shift dial • Horizontal is at the horizontal limit of the shift range, you cannot turn the dial to the
horizontal limit.
• When the projector is tilted and you adjust KEYSTONE, the center of the screen and the lens need to be realigned.
• Do not force the lens shift dials to turn as this may damage the projector. Turning the dials maximum limit is 4 or 5 times
from the default position.
Projector
V
Vertical center of
screen
SH
Screen
SW
100%
100%
40%
H
Placement
Center of lens
Shift range
40%
Projector
Setting up
E
NGLISH - 17