Greenheck DFD Series Installation, Operation And Maintenance Manual page 17
Curtain fire dampers
Hide thumbs
Also See for DFD Series:
- Installation, operation and maintenance manual (12 pages) ,
- Manual (12 pages) ,
- Installation instruction booklet (52 pages)
Table of Contents
Advertisement
®
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with these instructions will result in voiding of the product warranty and may result in personal injury
and/or property damage.
These instructions apply to 1
block, or stud walls and 2) concrete floors. Specific requirements in these instructions are mandatory. Dampers must
be installed in accordance with these instructions to meet the requirements of UL 555 and/or UL 555S.
Note: Combination fire smoke and fire dampers are manufactured and labeled for either vertical or horizontal
installation. The dampers must be installed in accordance with labeling.
Receiving and Handling
Upon receiving dampers, check for both obvious
and hidden damage. If damage is found, record all
necessary information on the bill of lading and file
a claim with the final carrier. Check to be sure that
all parts of the shipment, including accessories, are
accounted for.
Dampers must be kept dry and clean. Indoor storage
and protection from dirt, dust and the weather is
highly recommended. Do not store at temperatures in
excess of 100°F (38°C).
This manual is the property of the owner and is required for future maintenance. Please leave it with the owner when
the job is complete.
⁄
and 3 hour rated fire and combination fire smoke dampers mounted in: 1) masonry,
1
2
Multi-Blade Fire and Combination Fire
DFD-xxx, DFDAF-xxx, FSD-xxx, FSD-xxxV, IMO-xxx, SEDFD-
1
⁄
and 3 Hour Fire and Combination Fire Smoke Dampers
1
2
(with factory installed sleeve and actuator)
Table of Contents
General Information ............................................. 2
Pre-Installation Guidelines ................................... 2
Electrical Guidelines ............................................. 2
Installation .......................................................3-11
• Preparation of Openings ............................... 3
Sleeves & Wall/Floor Openings .................... 4
Assemblies ................................................4-5
• Multiple Section Damper Wiring .................... 5
• Maximum Assembly Tables ........................... 5
Openings ....................................................... 6
Assembly to Wall/Floor Openings .............7-8
• Duct to Sleeve Connection .......................9-10
Device Connections ..................................... 11
Commissioning and Periodic Testing ................. 12
Maintenance ...................................................... 12
Troubleshooting ................................................. 12
Safety Warning
Multi-Blade Fire and Combination Fire Smoke Dampers
Document 481318
Smoke Damper
xxx, SEFSD-xxx, and SSFSD-xxx
1
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
