Removal Method; Removing The Projector - Panasonic ET-PAD310 Installation Instructions Manual

Removal method

Removing the projector

• WHEN INSTALLED USING CEILING BRACKETS FOR HIGH CEILINGS
• WHEN INSTALLED USING CEILING BRACKETS FOR LOW CEILINGS
Attention
z After use, dispose of the set and projector mount bracket in an appropriate manner.
8
Hex head bolts
A Remove two hexagonal bolts with washers.
B Loosen the left and right hexagonal bolts slightly,
Hook
Hex head bolts
z Be sure that the hexagonal bolts with washers are
z Removing the projector must be carried out by two or
Hook
C Remove six hexagonal bolts with washers on the
z The hexagonal bolts with washers and the angle
Angle adjustment bracket
and remove the set from the hooks on the angle
adjustment bracket.
Attention
not loosened more than necessary.
more persons.
angle adjustment bracket from the projector mount
bracket, and remove the angle adjustment bracket.
Attention
adjustment bracket that have been removed are
re-used.