Product Description - Panasonic ET-PAD310 Installation Instructions Manual

Projector ceiling mount bracket
Table of Contents

Advertisement

Important Safety Notice (Continued)
When installing, always use the supplied components.
z Otherwise, this may cause damaged projector to fall and cause injury.
Do not hang from or hang objects on the projector or ceiling mount bracket.
z The projector may fall and cause injury.
Install the mounting screws and power cable in such a way that they will not make
contact with the inside parts of the ceiling.
z Electric shocks may result from contact with any metal objects inside the ceiling.

Product description

This is a ceiling mount bracket for installing projectors.
■ Applicable ceiling bracket: ET-PKD77H, ET-PKD75S, TY-PKD75S, ET-PKD100H, ET-PKD100S,
■Structural components
Parts name
Projector
mount bracket
Screws and bolts
Drop prevention set
■The user must also obtain the following parts. (commercially-available)
Installation work
Attaching the drop prevention set
(bolt diameter: M8)
z Store small parts in an appropriate manner, and keep them away from young children.
z Tightening torques for the screws are, M6: 4 ± 0.5 N•m, M8 (and 5/16") : 10 ± 1 N•m.
z Use a torque screwdriver or torque wrench to tighten screws and bolts to their specified tightening torques.Do
not use electric screwdrivers or impact screwdrivers.
z If metal parts are no longer being used, they should be removed by a qualified technician as soon as possible.
ET-PKD56H, ET-PKD55S, TY-PKD55S
Sub-components (number of parts)
Hex head bolt, captive washer
(M6 × 16) 5 pieces
M8 flat washer x 4
Wire rope fixing screw
(Screw, captive washer (M6 x 20)) x 2
Anchoring nut or curled plug (M8 or 5/16") (× 2),
Hex head bolt (× 2), Spring washer (× 2)
Applications
The main projector body is mounted to
this bracket, which is then attached to a
ceiling bracket that has been mounted
in advance on the ceiling. Has an
adjustment mechanism allowing tilting
to the left and right.
x 1
Used for mounting the projector onto
the projector mount bracket.
Wire rope x 2
Prevents the projector from falling.
Required parts
Page
13
3

Advertisement

Table of Contents
loading

Table of Contents