Standard Installation Dimensions - Panasonic ET-PAD310 Installation Instructions Manual

Standard installation dimensions

The distances and angles which relate to the projection of the picture from the projector onto the screen are
shown in the table below.
The projection distance measurements can be adjusted using the zoom lens (excludes ET-D75LE5 / LE50).
Check the projection screen while making fine adjustments.
L
Screen
Ú This figure shows an example of mounting ET-PKD77H.
Ú The distance is 205 mm (8-1/16") in the case of installing ceiling brackets for low ceilings ET-PKD75S and TY-
PKD75S.
Attention
z Install the projector with a space more than 500 mm (19-11/16") behind it so as not to interfere with projector
ventilation.
z Leave a space of 300 mm (11-13/16") on each side of the projector.
z When replacing ET-PKD100H/ET-PKD77H, the focal point of the projection lens moves 54 mm (2-1/8")to the
right when viewed from the rear of the projector.
4
Ceiling
198 342
(7-25/32) (13-15/32)
L1
Unit: mm (")
L1 size
Lens
(Approx.)
114.4 (4-1/2)
ET-D75LE1
ET-D75LE2 98.9 (3-29/32)
ET-D75LE3 102.4 (4-1/32)
ET-D75LE4 126.3 (4-31/32)
ET-D75LE5 202.4 (7-31/32)
ET-D75LE6 211.9 (8-11/32)
ET-D75LE8 254.4 (10-1/32)
ET-D75LE10 125 (4-29/32)
ET-D75LE20 121 (4-3/4)
ET-D75LE30 121 (4-3/4)
ET-D75LE40 124 (4-7/8)
ET-D75LE50 203 (8)