Operation; Maintenance - Profile 545142009 Manual

Tower fan
545142009
WARNINGS
•
Never place the fan near flammable liquids and units operating on gas.
•
Make sure that the fan cannot come into contact with water or other liquids, this can lead to the
risk of electric shock.
•
Do not insert objects or fingers in the rotating fins of the unit. Protect your children from this danger.
•
Never try to repair the unit yourself. All interventions that are performed by an unauthorised person
could be dangerous; the warranty will be void in this case. Also the replacement of the power cord
needs to be performed by a qualified electrician
•
Use this unit only inside and operate it according to these instructions. Do not use the unit for other
purposes.
•
Do not use the unit outside and always place it in a dry environment.
•
Check the power cord from time to time. Never use the power cord, plug or appliance when they
are damaged.
•
Unplug the fan from the outlet before moving the fan.
•
Unplug the fan before cleaning the fan.
•
Make sure the fan is on a flat and stable surface during operation so that it cannot fall over.
•
Never use an extension cord.
•
Do not use chemical products to clean the fan.
•
Make sure that children are supervised by an adult when they are near a working fan.
ASSEMBLY
•
Assemble the 2 parts of the foot together(1)
•
Fix at the bottom with the short screws supplied (2)
•
Place the fan on a soft surface with the bottom facing upwards. Bring het cord through the
opening in the base, fasten the base to the fan and make sure that the screw holes match those
on the fan. Fasten the base with the long screws (3)
•
Make sure that the cord cannot become trapped. Fasten it in the recess for that purpose in the
base. The fan is ready for use (4)

OPERATION

•
To turn the fan on switch the timer to the ON position and select the desired speed: 0 = OFF / 1 =
low / 2 = medium / 3 = high.
•
Activate swivel mode to have the fan swivel from left to right (large button at the front)
•
Activate the timer by setting the required time with the timer button. Switch the timer button to
"ON" to have the fan work without timer.

MAINTENANCE

Warning:
To prevent an electrical shock you should turn the unit off and unplug it from the wall outlet before you
start any maintenance or repairs.
Cleaning
•
Remove the plug from the wall outlet before cleaning the device.
•
Clean the enclosure with a soft, damp cloth. Do not use chemical solvents (such as benzene,
alcohol, gasoline).
•
Do not let water drops fall on the device.
If you will not use the unit for a long period:
•
Turn the machine off and unplug the power cord.
•
Store the unit in a dry place.
•
Keep the unit dust free.
EN - 3