Table of Contents
Advertisement
5
Check operation
C. Broiler burner
Turn the oven selector to "BROIL."
Make sure the oven
temperature
is set on "BROIL."
The broiler burner
should automatically
light in 50 to 60 seconds.
D. Clock
(if so equipped)
Refer to operating
instructions
in the Use and Care
Guide (packed in the oven).
A. Surface burners
1. Push in and turn the knob to "LITE"
position.
2. When the burner lights, turn the knob clockwise to
the desired setting. Do not leave the knob in the
"LITE"
position
once the burner
lights.
3. If the flame should go out during the cooking opera-
tion, turn burner off. If gas has accumulated
and a
strong odor is detected, wait five minutes for odor
to disappear. To relight burners repeat steps 1 and
2 above.
B. Oven burner
Turn the oven selector to "BAKE."
Turn the oven
temperature
control to a desired setting. The oven
burner should automatically
light in 50 to 60 seconds.
E. Cleaning
See the Use and Care Guide that was packed in the
oven for proper care and cleaning
instructions.
R n
Before you call
PJ f
or service
l
. .
See the Use and Care Guide for trouble-shooting
checklist.
Be sure power cord is plugged in
Be sure the gas supply is turned on.
Check for blown fuses or tripped circuit breaker.
If you must call for service. . .
You will need the appliance model and serial number.
Find the serial plate at top center of the oven front
frame.
11
Advertisement
Table of Contents
