Siemens DMS8000 MP4 Series Connectivity Manual page 11

Building Technologies
Fire Safety & Security Products
Connecting the cameras
1. Select and expand the DVR node.
2. Select and expand the DVR Video-in folder.
3. Add the required video inputs: note that input number can be customised.
4. Select and expand the Video Cameras folder.
5. Select the video-out node of the camera.
6. Drag and drop the 'video signal' to the DVR video-in node.
Fig. 5 Connecting cameras to video inputs
Video Monitors and Alarm I/O
Each DVR unit also includes monitors and alarm in/out objects. For the configura-
tion of these objects, you can also refer to the Video Connectivity Guide (doc.no.
A6V10062457).
Video camera coverage
The video camera coverage is configured graphically or via manual associations as
described in the Graphical Map Configuration (doc.no. A6V10062441).
Camera Extensor tab and Preset Position for event treatment
In the Camera Extensor tab of each node, you can see the camera associations
and manually add one or more cameras to the list associated with the selected
node. Also, for dome and PTZ motorised cameras, you can set the default Preset
Position where the camera is moved when is first selected during event treatment.
Refer to the point customization section of the MM8000 Installation, Configuration
and Commissioning manual (ICC, doc.no. A6V10062413) for more information
about the Camera Extensor tab.
DMS8000 Video Connectivity Configuration Guide – NICE Add-on
9
06.2009